CF1230F
12-inch, cast aluminium chassis, ferrite magnet LF driver
- Balanced airflow venting provides enhanced cooling
- Single demodulation ring
- Glass loaded paper cone with weather-resistant impregnation
Specifications
1000W
Continuous power rating
98dB
Sensitivity
3in
Voice coil diameter
Nominal diameter
305mm / 12in
Power rating
500W
Continuous power rating
1000W
Rated impedance
8Ω
Sensitivity
98dB
Frequency range
50-3000Hz
Chassis type
Cast aluminium
Magnet type
Ferrite
Magnet weight
2.2kg / 75oz
Voice coil diameter
75mm / 3in
Voice coil material
Edgewound copper clad aluminium
Former material
Glass fibre
Cone material
Glass loaded paper (weather-resistant)
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.31in
VC winding height (Hvc)
19mm / 0.75in
Parameters
Sd
530.93cm2 / 82.29in2
Fs
56.50Hz
Mms
63.75g / 2.25oz
Qms
4.33
Qes
0.342
Qts
0.317
Re
5.08Ω
Vas
49.61l / 1.75ft3
BI
18.33Tm
Cms
0.12mm/N
Rms
5.23kg/s
Le (at 1kHz)
0.74mH
Xmax
7.5mm / 0.3in
Mounting Information
Overall diameter
315mm / 12.4in
Overall depth
153mm / 6.0in
Cut-out diameter
282mm / 11.1in
Mounting hole dimensions
10x6.5mm / 0.39x0.26in
Number of mounting holes
8
Mounting hole PCD
294-300mm / 11.6-11.8in
Unit weight
6.8kg / 14.9lb
Packed Dimensions & Weight
Multi pack qty
60
Multi pack size W x D x H
1210mm x 1050mm x 980mm / 47.6in x 41.3in x 35.4in
Multi pack weight
435kg / 870lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: 0.5*(Hvc-Hg) + 0.25*Hg
